LEVITON  -  ODS0D-ID  -  Dual-Relay, Decora Wall Switch Passive Infrared (PIR) Occupancy Sensor. 

Description: 
Product Line: ODS0D, Technology: Passive Infrared, Switch Type: Single-Pole, Dual Relay, Mounting: Wall Switch, Device Type: Occupancy Sensor, Coverage (Sq.Ft.): 2100 Sq. Ft., Pattern: 180°, Color: Ivory, Neutral Wire Connection: Not Required.

BASIC OPERATION: 
The ODS0D uses passive infrared (PIR) technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field-ofview into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches two separate lighting loads ON. The lights will remain ON as long as there is an occupant moving through the sensor zones. The ODS0D-TD has an adjustable 30 minute time delay setting for the first and second relay to comply with CEC Title 24. The second relay is manual-ON only.

APPLICATIONS:
Leviton’s ODS0D Dual-Relay Decora Wall Switch Passive Infrared (PIR) Occupancy Sensor is used to provide automatic lighting control for energy savings and convenience in a variety of commercial applications, including:

• Classrooms • Conference rooms • Offices • Multimedia rooms • Day care centers • Lounges • Daylight harvesting • Bi-level or A/B switching

The ODS0D provides automatic switching of two separate lighting loads from a single unit. It is compatible with incandescent, fluorescent and low-voltage lighting. The unit features dual manual-override switches that can be used to toggle the ON/OFF status of each lighting load while an area is occupied. The ODS0D can be installed in place of two single-pole wall switches and fits in a standard single-gang wall box. The unit requires a ground connection for proper operation.

Dual-relay, Decora passive infrared wall switch occupancy sensor, 180° field-of-view provides approximately 2100 square feet of coverage, suitable for a variety of commercial areas. 

***Wall Plate not included with Occupancy Sensors***

• Controls two separate lighting loads from a single unit
• Features new self-adjusting occupancy sensor technology with automatic "walk-through" sensing
• Choice of "Conference Room" or "Class Room" modes for maximum performance in a variety of installations
• Convenient dual push-buttons provide manual on/off light switching of each load at any time
• Viewing Mode feature for slide or film presentations allows push buttons to turn lights off and keep them off even if room is occupied