Halo - 5" Housing IC Air-Tite Recessed Remodel 120V Line Voltage - H5RICAT 
 
Product Description
The Halo H5 series utilizes a 5” aperture designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The 5” diameter trim size makes the H5RICAT the right choice for applications where dramatic yet inconspicuous lighting is required in an existing ceiling. 

• Quick Connect wiring connectors included in junction box
• AIR-TITE™
• Thermally protected
• Die-formed housing
• Remodel springs accommodate 1/2" and 5/8" ceiling material
• NM cable pry-outs and conduit knockouts in junction box

 
Spec FEATURES 

 
Housings
Gasketed die-stamped 20 gauge aluminum. Housing will slip through 5 1/2” ceiling opening. Integral flange secures fixture against ceiling. Housing accommodates a wide range of Halo 5” trims. Torsion springs on all trims for quick and easy installation. 
 
Remodel Clips
Four remodel clips secure housings and accommodate 1/2” and 5/8” ceiling material 
 
Junction Box
UL Listed for through branch circuit wiring. Seven conduit knockouts are uniform 1/2” size with true pry-out slots. Four Romex pry-outs simplify Romex installation. 
 
“Quick Connect” Connectors
Three “Quick Connect” connectors eliminate need for separate wire nuts - simply strip supply wires and push in
 
Socket
Porcelain socket with nickel plated brass screw shell, snaps into trim for consistent lamp positioning. Shipping insert protects socket from overspray
 
Thermal Protector
Integral thermal protector deactivates fixture if an incorrect lamp is used or if ceiling insulation material is not applied correctly.
 
Labels
- UL/cUL Listed 1598 Luminaire
- UL/cUL Listed for Feed Through
- UL/cUL Listed for Damp Location
- UL/cUL Listed for Wet Location with select trims
- UL/cUL Listed for Direct Contact with insulation and combustible material*
 
Qualification
IC and Air-Tite™ certified under ASTM-E283 and listed UL/cUL 1598. May be used to meet insulated ceiling* and restricted air-flow requirements such as:
- Washington State Energy Code
- International Energy Conservation Code (IECC)
- New York State Energy Conservation Construction Code (NY-ECCC)
* Not to be used in direct contact with spray foam insulation. Refer to NEMA LSD 57-2013