Loading... Please wait...

Lighting Products Cree - Led Recessed Ushio Led Kidde Silhouette Lightech Transformer Cadet Outdoor Heater Lutron Dimmers

Our Newsletter


Cadet 1500W 240V Com-Pak Plus Fan-Forced Wall Heater Kit

  • CSC152TW
  • Image 2
Cadet 1500W 240V Com-Pak Plus Fan-Forced Wall Heater Kit
$194.95
Price:
$194.95
SKU:
CSC152TW
Brand:




Product Description

CADET 1500W 240V COM-PAK PLUS FAN FORCED WALL HEATER PART NO.67506

The Cadet 1500W 240V Com-Pak Plus Fan-Forced Wall Heater Kit (CSC152TW) is Cadet's most popular in-wall fan heater. An economical choice that includes highly regarded updated safety components. These heaters are perfect for smaller areas or larger areas needing the dispersed heat created by multiple heaters. Cadet recommends a wallmounted thermostat for optimum performance, or you may prefer the convenience of an optional built-in thermostat.

  • Primary and Secondary Thermal Safeguards
  • Robust, heavy duty high temperature manual power reset
  • Over temperature one-time thermal fuse
  • Nichrome coil element for quick heat
  • Powder coat paint process eliminates sharp metal edges
  • Wall can designed for ease of installation
  • Horizontal or vertical grill mounting options
  • Rough In Dimensions: 8"W x 10.25"H x 4"D
    Wall Can Dimensions: 7.875"W x 11.5"H x 4"D
    Grill Dimensions: 9"W x 12"H x 1"D

 

NOTE: Manufacturer recommends installing heater assembly after walls are finished. Heater must be cleaned every six months minimum



 

Cadet 1500W 240V Com-Pak Plus Fan-Forced Wall Heater Kit

CADET 1500W 240V COM-PAK PLUS FAN FORCED WALL HEATER PART NO.67506

The Cadet 1500W 240V Com-Pak Plus Fan-Forced Wall Heater Kit (CSC152TW) is Cadet's most popular in-wall fan heater. An economical choice that includes highly regarded updated safety components. These heaters are perfect for smaller areas or larger areas needing the dispersed heat created by multiple heaters. Cadet recommends a wallmounted thermostat for optimum performance, or you may prefer the convenience of an optional built-in thermostat.

  • Primary and Secondary Thermal Safeguards
  • Robust, heavy duty high temperature manual power reset
  • Over temperature one-time thermal fuse
  • Nichrome coil element for quick heat
  • Powder coat paint process eliminates sharp metal edges
  • Wall can designed for ease of installation
  • Horizontal or vertical grill mounting options
  • Rough In Dimensions: 8"W x 10.25"H x 4"D
    Wall Can Dimensions: 7.875"W x 11.5"H x 4"D
    Grill Dimensions: 9"W x 12"H x 1"D

 

NOTE: Manufacturer recommends installing heater assembly after walls are finished. Heater must be cleaned every six months minimum



 

$194.95

Product Specifications

Architectural Information:
Fan forced electric air heaters shall be UL Listed, factory rated at 120V, 208V, and dual field rated 208V/240V. A painted 20 gauge wall mounting can with six knockouts and 34 cubic inch wiring compartment shall be provided with each complete heater. Each complete heater shall be of unitized construction and attach to the wall can with a single screw and shall be self-contained and completely separate from the wall mounting can. Element is of nichrome type wire wrapped on mica insulators with an oversized 16 amp rating at 240V, high temperature manual power reset limit switch and an over-temperature thermal back-up fuse. A two stage centrifugal blower shall be driven by an impedance protected motor. The motor shall be totally isolated from the heating chamber. Metal grill shall be of one piece, 20-gauge construction and finished with a powder coat paint system.

Technical Information:
Fan heaters and thermostats work best when installed on an inside wall. UL requires heater to be placed a minimum distance of 6” from adjacent surfaces and 4½” from the floor. Manufacturer recommends installation 12” from all surfaces. All models 1500 watts or less may be ceiling mounted. A 3’ (91.44cm) minimum clearance is required for furniture or other objects placed directly in front of heater.

NOTE: Manufacturer recommends installing heater assembly after walls are finished. Heater must be cleaned every six months minimum.

Manufacturer - Limited 1 year warranty

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the Cadet 1500W 240V Com-Pak Plus Fan-Forced Wall Heater Kit to your wish list.

Recently Viewed